DeDietrich G25 Manual de Serviço descarregar pdf (Página 35)

15/02/2011 - 300014279-001-J DTG(E)130 - 35/45/65/90/115 Eco.NOxPlus

8. Connecting the furnace

8.5 Electrical connection

The appliance must be powered by a circuit containing an omnipolar

switch with an opening distance 3 mm.

` Open the panel flap.



Unscrew the 2 mounting screws at the back of the top panel

Lift

and tilt the back of the top panel.



Unscrew the 2 mounting screws from the screen

Remove the

card cover.





Pass the 230V and sensor cables through the

openings in the rear panel in the order 230V, sensor.

` Attach the cables to the cable clamps provided for this purpose.

` Position the cable connectors on the card.

` Follow in reverse order for re-assembly.



Check on the path of the cables when replacing the drawer

supporting the sensor relay card.

1 3-way valve (circuit C)

2 Pump (circuit C)

3 Safety thermostat (circuit C)

4 3-way valve (circuit B)

5 Pump (circuit B)

6 Safety thermostat (circuit B)

7 Auxiliary outlet

8 DHW pump or Reversal valve

9 Pump (circuit A)

10 Limiting thermostat and permanent phase

11 Pre-wired power supply

12 Flow sensor (circuit B)

13 Input 0-10 V

14 Room sensor (circuit B)

15 Room sensor (circuit A)

16 Domestic hot water sensor

17 Outside sensor

18 Safety contact

19 Telephone relay

20 Room sensor (circuit C)

21 Flow sensor (circuit C)

C001247

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 91 92

Comentários a estes Manuais

Sem comentários

DeDietrich G25 Manual de Serviço Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões DeDietrich G25