DeDietrich Cooking hob Manual do Utilizador descarregar pdf (Página 15)

44

1 / INSTALLING YOUR APPLIANCE

••

Tip

- Each time you change the gas supply,

tick the box corresponding to the new gas

level on the label found in the plastic bag.

Refer to the corresponding “Gas

Connection” section.

—

Replace the corresponding gas injectors, in

accordance with the positioning of the

injectors and the gas characteristics table

shown at the end of this section . To do this:

—

First screw them in manually until the

injector locks into place.

—

Apply the corresponding spanner to the

injector.

—

Turn the spanner clockwise

.

Warning

Screw on the adaptor with a torque not

exceeding 4 N.m.

Exceeding this limit may damage the

product.

—

Replace the head of the burner, the cap and

the grill.

CHANGING THE GAS SUPPLY

(

High-power burner)

Warning

Your appliance is sold pre-set for

natural gas. The injectors required for

adapting it to butane/propane can be found

in the plastic bag containing this guide.

Each time you change the gas supply, you

must complete the following:

— Flip the gas changing switch TO THE RIGHT or

TO THE LEFT depending on the gas selected (Fig.

01).

— Adapt the gas connection

— Change the injectors

— Adjust the hob connections.

•

AAddaapptt tthhee ggaass ccoonnnneeccttiioonn

: Refer to the

“Gas Connection”

section.

•

CChhaannggee tthhee iinnjjeeccttoorrss,,

proceeding as

follows:

—

Replace the grill, the cap, and the head of

the burner.

—

Using a No.10 spanner, unscrew the central

injector located at the base of the burner unit

(see ) and using a No. 7 spanner, unscrew

the 3 injectors located around the central

injector (see ) around (

Fig. 02).

B

A

Fig. 02

B

A

Fig. 01

Interrupteur

Gaz naturel

Gaz

Butane/Propane

99641823_A_ML.qxp 12/09/2007 10:16 Page 44

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Comentários a estes Manuais

Sem comentários